Handguns of the Old West There could be a number of starting points for a story on handguns of the old west. I have chosen to start with the Colt Paterson, the first practical multiple-shot revolver using a percussion cap to ignite the powder shooting a round lead ball. The single shot muzzleloading firearms that preceded the Paterson are covered in the story on “Early Muzzleloading Pistols and Rifles” in this website. For more information on the percussion cap firearms and their successors described in this story, the reader is referred to the references listed at the end of the story. Although the idea of a revolving cylinder had been around for some time, it took Samual Colt’s inventiveness and the emerging technology of percussion caps to make the concept a reality. Colt obtained a patent for a repeating firearm in and began manufacturing the Colt Paterson model revolver in in his shop in Paterson, New Jersey, hence the name of the gun. According to Flayderman reference listed below , the first Paterson model was a pocket model: A later Paterson model No.
15. UNITED STATES FIREARMS’ SINGLE ACTION SIXGUNS
Mason did not stop with his improvement to the Richards Conversion. As soon as the design was accomplished, Mason set about working on the Open-Top. While the Thuer, Richards, and Richards-Mason were true conversions on existing cap and ball revolvers or built from parts at the factory, the Open-Top was Colt’s first big bore single action cartridge firing revolver, as it was not a conversion but a totally new design with new parts that do not interchange with the percussion models or their conversions.
All original Open-Tops were made in.
Single Action Army, Buntline & New Frontier SAA (Post-War) Colt Double Action Revolvers top. Lightning Frontier Navy , 94, 95, 96, , 03, New Army & Navy Models Marine Corps Army Special & Officer’s Model Bankers Special Camp Perry Model.
Among many Peacemaker fans, there’s a misunderstanding of the terms “black powder” frame or “smokeless” frame, so let’s clear the smoke. The “black powder” moniker comes from the fact that, the first Peacemaker Colts were made with a cylinder base pin retaining system that used a single screw, located at the front of the revolver’s frame. In , at around serial number , , Colt changed over to the so-called “smokeless” frame, where the cylinder base pin is held in place by spring-loaded cross-pin screws.
Ironically, this system has nothing to do with smokeless powder, since Colt did not guarantee any of their Single Action Army revolvers for use with the then new smokeless propellant until around serial number , Furthermore, this system had been employed as early as and again in , on Colt’s double-action models. The so-called “smokeless” cross-pin system allows for the cylinder to be removed from the frame simply by manually depressing the cross-pin screws, pulling out the base pin, then removing the cylinder, whereas the older single screw system requires a screwdriver to remove the base pin retention screw, then the cylinder.
While the more modern system is certainly faster in removing a cylinder, it does present a potential problem. That is if the cross-pin screws loosen up and the base pin slides forward during recoil of the gun, the cylinder can become stuck or actually fall out of the frame. This shooter has had this happen on a number of occasions.
The Worst Pistol Ever: Type 94 Nambu
Background Although large numbers of commercial holsters were manufactured and sold, the commercially manufactured holsters for the pistols are difficult to find these days and the reasons for this are quite simple: Also, commercial holsters were generally not as well made as the military holsters, therefore they deteriorated rapidly. Abercrombie and Fitch dealt with two firms who produced their holsters:
New York Engraved Colt Single Action Army caliber revolver. Made in 7½” barrel in This gun was originally had etched panel but was engraved over.
This must happen in the proper sequence and at the proper moment. In most revolvers this process is far less critical than the old style Colt revolver action. In the old style Colt’s, correct timing is absolutely critical and timing must be exact. Open the cylinder and look at the small “lug” in the bottom of the cylinder window. This is the cylinder locking bolt. Cock the hammer, and watch as the bolt retracts into the frame and pops back out.
The bolt should retract smoothly with no hesitation until it’s fully retracted, then it must pop back out with a clean “snap”. There should be no hesitation, and no amount of “creeping” back out. Use your left thumb or fore finger to again cock the hammer, closely watching the cylinder bolt as you SLOWLY cock the hammer.
Army Veteran, Gun Writer Arrested: Previously Convicted of Deer-Camp Crime
You will find 2 day diet japan lingzhi a well-known Topix forum carefully thread on the two Day Diet 2 day diet japan lingzhi regime supplement subject. Definitely worth bookmarking for revisiting. I wonder how a lot effort you put to make the sort of great informative web site.
Thelma Bentley: Dating colt saa Henry Nettleton was the U. Colt Single Action Army 1st Generation. The name Bisley came from the famous firing range in BisleyDating colt saa.
The voyage was long, and the lad was subjected to great hardships, which soon convinced him that running away to sea was not as romantic in real life as in the books he had read, but his experience, though uncomfortable enough, failed to conquer his restless spirit. While at sea in the Coroo he had an abundance of leisure time for reflection, but instead of devoting it to meditating upon the folly of his course, he spent it in inventing a revolving pistol, a rough model of which he cut in wood with his jack-knife.
This was the germ of the invention which afterward gave him such fame, and it is not a little singular that the conception of such a weapon should have come to a boy of fourteen. Returning home, he became an apprentice in his father’s factory at Ware, Massachusetts. He was put into the dyeing and bleaching department, and was thoroughly trained in it by Mr. Smith, a scientific man, and one of the best practical chemists in New England.
Young Holt manifested a remarkable aptitude for chemistry, and when but a mere boy was known as one of the most successful and dexterous manipulators in New England. When he had reached his eighteenth year, the old spirit of restlessness came over him again, and he embarked in an unusually bold undertaking for one so young, in which, however, he was much favored by the circumstance that he was very much older in appearance than in reality, commonly passing for a full-grown man.
Assuming the name of Dr. Coult, he traveled throughout the Union and British America, visiting nearly every town of two thousand inhabitants and over, lecturing upon chemistry, and illustrating his lectures with a series of skillful and highly popular experiments. His tour was entirely successful, and he realized in the two years over which it extended quite a handsome sum. The use which he made of the money thus acquired was characteristic of the man.
English @ Work
William Mason and Charles Brinckerhoff Richards who had developed a number of revolvers and black powder conversions for the company. Their effort was designed for the United States government service revolver trials of by Colt’s Patent Firearms Manufacturing Company and adopted as the standard military service revolver. Relative to period cartridges and most later handgun rounds, it was quite powerful in its full loading. By the end of , serial no. There was also a variant with a sub inch barrel, without an ejector rod, unofficially called the “Sheriff’s Model”, “Banker’s Special”, or “Storekeeper”.
Colt manufactured of these revolvers with a frame that was flat on top and fitted with an adjustable leaf rear sight.
Colt’s Manufacturing Company – firearms, handguns, pistols, rifles, revolvers.
How many times have I heard of great gun bargains being found at yard sales? One of our locals several years bought an old belt with a funny looking metal plate on it. That funny plate was a Bridgeport Rig see picture in Chapter 8 worth several hundred dollars, and that is not the end of the story. The old belt was a money belt and had several gold coins stashed inside it for who knows how many generations. That’s the good news; the bad news is one has to wade through hundreds of yard and garage sales to find anything.
That totals out to working for very cheap wages. I don’t do yard or garage sales, however, until I could no long take the constant liberal slant and spin of our local paper, it was my regular habit to read the Guns For Sale section in the morning paper’s want ads as well as attend all the local gun shows. Reading the paper took very little time, and even if one buys nothing at a gun show, it is always a pleasant experience to visit with other shooters.
By checking the paper and gun shows, I expected to find at least one special sixgun per year. It may be a like new Ruger.
Dec 31, Sis brought up a pretty rough looking Colt SA 22mag.. The CCH not too bad, bluing bad. Gun was used fox hunting, rode in saddle bag in case horse or hound needed to be put down.
According to two excellent publications for students of the 2nd Generation Single Action Army, Don Wilkersons’ book, The Post-War Colt Single Action Army (), and George Garton’s Colt’s SAA Post War Models (), serial numbers started in with .
The 1st and ONLY definitive work on cartridge boxes, covering all the calibers for which Winchester cataloged their rifles, from the Volcanic to the Model Thoroughly researched, this page book contains over 1, full color photographs as well as price and rarity guides in a high quality, hard-cover book with dust-jacket! Will be happy to sign or personalize your copy on request. The callout on the side is for the Model 65 although, by this time , the M65 had been discontinued and the Mod 43 had been introduced.
Seldom seen box and only the second one I have ever offered. While the box contains but 9 original rds so-headstamped and is missing the rt end of the lid, this is no “Bargain Bin” item: It’s only the 2nd one I’ve seen in 25 years!
Original Colt Bisley
Yes your points are valid, but I was just being humorous. All in all though if I were to choose a service pistol of the era to take into battle, I would pick… Any other one! Vhyrus Worst pistol ever made? Someone obviously never owned a jimenez or cobra.
In SAA revolvers became available only from the Colt Custom Shop, and the New Frontier model is not available at all. This is a pity because the SAA New Frontier was Colt’s only big bore hunting revolver. The Colt Cowboy. An offshoot of the standard SAA is the Colt Cowboy single action revolver.
It is a desirable collectible due to its rarity. The date of that occurrence used to be set at but Mike Venturino has reported instances of factory chamberings dating back at least to , IIRC. I don’t know the numbers offhand, but there may have been more Smith and Wesson single actions, such as the above, chambered in the 44 RF than there were Colt SAA’s.
Both are rare guns though. The first factory conversions were of the Remington Army. The Rogers and Spencer is interesting. I’d be very careful what cartridge I shot in it.
Colt SA .22mag
For me, that gun was a six-inch barreled Colt Python. I had some good reasons for not buying it. I was in the US Army at the time, stationed at Ft. The year was , and I was a PFC assigned to a motor transport company.
The Colt Single Action Army, also known as the “Peacemaker”, is a single action revolver. It was designed for the U.S. cavalry by Colt and adopted in , Designer(s): Colt.
One thousand of these were shipped to the Rock Island Arsenal earmarked for the 7th Cavalry. Prior to the Black Hills expedition, some of these were issued to the 7th Cavalry. The chart below shows the estimated serial range of the revolvers of the Army contract of July 23, Lot 1 — revolvers, estimated serial numbers received Springfield Armory November 28, Lot 2 — revolvers, estimated serial numbers received at Springfield Armory December 19, Lot 3 — revolvers, estimated serial numbers , received at Springfield Armory January 3, Lot 4 — revolvers, estimated serial numbers received at Springfield Armory January 24, Lot 5 — revolvers, estimated serial numbers , received at Springfield Armory January 31, From this lot revolvers were issued in late June, prior to the Black Hills campaign to the 7th Cavalry.
Lot 6 — revolvers, estimated serial numbers , received at the Springfield Armory February 17, Although shipping records are incomplete, it is almost conclusive, some guns from this range were issued to the 7th Cavalry for Companies D and I, which included turn-ins from Company K. Lot 7 — revolvers, estimated serial numbers , received at Springfield Armory, March 5,
Valid Credit Card required for bidding approval Payment Options: Your purchases will be charged to your Master Card, Visa, credit card immediately following the auction. If you choose to use another shipping service this must be arranged by buyer. We begin the shipping process right away at auctions ending. Please allow days to be contacted, about shipping. Shipping may take up to two weeks.
The Colt Single Action Army, also known as the Single Action Army, SAA, Model P, Peacemaker, M, and Colt is a single-action revolver with a revolving cylinder holding six metallic cartridges.
The backbone may be cut with a single line or engraved with a wiggle tool pattern as in Western bright cut engraving. The backbone may also be implied, rather than cut, by the convergence of leaves along a spiral shape. The illustration shows a simulated sideplate on which are drawn the backbones of scrolls that will later be engraved. BACK-CUT — A return cut over the same line with a different graver or with the graver tilted in a different direction from the primary cut. In flare cut or double bevel scroll, each leaf is made up of a primary cut and a back cut.
Background is usually matted with a punch or liner in bas-relief work and cut away with a graver in medium or high relief work. The engraved scroll or figures are the foreground as contrasted with the background. The center photo shows background treated with parallel lines on a shotgun engraved at the Franz Sodia factory in Austria.
The photo on the right shows work in progress of scrollwork on a Browning shotgun.